 |
|
|
|
AR 3000 62 - 2
both sides antiglare display glass, optically multicoated, slightly tinted to increase contrast
|
|
available glass thickness: |
|
3mm (0.12"), 4mm (0.16") |
|
transmission: |
|
approx. 62% |
|
use: |
|
antiglare display glass for monitors and FPD |
|
options: |
|
silk screen printing on glass |
|
|
AR 3000 62 G 80
one side antiglare display glass, chemical antiglare treatment GW 80
slightly tinted to increase contrast
|
|
available glass thickness: |
|
3mm (0.12") |
|
transmission: |
|
approx. 62% |
|
use: |
|
antiglare display glass for plasma screens and FPD |
|
|
AR 3000 62 G 80 SPL
one side antiglare display glass, chemical antiglare treatment GW 80
slightly tinted to increase contrast;
shatterproof laminated safety glass, two-glass construction
conductive coating: approx. 16 - 18 Ohm / square
|
|
available glass thickness: |
|
7.38mm (0.29") |
|
transmission: |
|
approx. 62% |
|
use: |
|
especially designed for plasma screens |
|
|
AR 3000 62 - 1 SP
one side antiglare display glass, optically multicoated,
slightly tinted to increase contrast;
shatterproof laminated safety glass, two-glass construction
|
|
available glass thickness: |
|
4.48mm (0.18"), 5.38mm (0.21"), 6.38mm (0.25") |
|
transmission: |
|
approx. 62% |
|
use: |
|
antiglare and laminated safety glass for monitors and FPD |
|
options: |
|
silk screen printing on glass |
|
|
AR 3000 90 - 2
both sides antiglare display glass, optically multicoated
|
|
available glass thickness: |
|
2mm (0.08"), 3mm (0.12"), 4mm (0.16") |
|
transmission: |
|
approx. 90% |
|
use: |
|
antiglare display glass for monitors and FPD |
|
|
AR 3000 90 - 1 SP
one side antiglare display glass, optically multicoated,
shatterproof laminated safety glass, two-glass construction
|
|
available glass thickness: |
|
4.38mm (0.17"), 5.38mm (0.21"), 6.38mm (0.25") |
|
transmission: |
|
|
|
use: |
|
|
|
|
AR 3000 90 - 2 SP
both sides antiglare display glass, optically multicoated,
shatterproof laminated safety glass, two-glass construction
|
|
available glass thickness: |
|
4.38mm (0.17"), 5.38mm (0.21"), 6.38mm (0.25") |
|
transmission: |
|
approx. 90% |
|
use: |
|
antiglare and laminated safety glass for monitors and FPD |
|
|
AR 3000 90 G 80
one side antiglare display glass, chemical antiglare treatment GW 80
|
|
available glass thickness: |
|
1.1mm (0.043"), 2mm (0.08"), 3mm (0.12"), 4mm (0.16") |
|
transmission: |
|
approx. 90% |
|
use: |
|
antiglare display glass for monitors and FPD |
|
options: |
|
silk screen printing on glass, shatterproof compound glasses |
|
|
AR 3000 90 G 80 SP
one side antiglare shatterproof glass, chemical antiglare treatment GW 80,
shatterproof laminated safety glass, two-glass construction
|
|
available glass thickness: |
|
2.6mm (0.1"), 3.4mm (0.13"), 4.3mm (0.17"), 6.3mm (0.25") |
|
use: |
|
antiglare FPD-front glass, shatterproof |
|
options: |
|
silk screen printing on glass |
|
|
AR 3000 90 L |
|
general description |
|
|
|
name / order no.: |
|
AR 3000 90 L
order no.: 20000803 ( no antiglare, 4mm (0.16"))
AR 3000 90 L
order no.: 20000802 ( no antiglare, 3mm (0.12"))
|
|
function: |
|
EMC-shielding glasses close openings in your housing with a highly transparent conductive coating on the inside surface of the glass. The construction without wire mesh performs a clear transparent view towards your display, which may carry an additional antiglare option.
Conductive adhesives tapes are available as an additional equipment tool. They can be used to connect the conductive coating on the glass to the conductive surface of the housing.
Please view our separate data sheet.
Optionally, EMC-shielding glasses are available as a vandalism-proof compound glass version.
|
|
technical specifications |
|
|
|
sizes: |
|
The glasses are produced in custom-tailored dimensions. Please keep in mind, that EMC-shielding glasses are to be connected along all edges of the glass-side and a non-transparent frame appears. This frame is 10 mm (0.39") wide on each side and has to be added to the transparent glass area as a minimum and eventually the mechanical connection to the frame as well. |
|
available glass thickness: |
|
3mm (0.12"), 4mm (0.16") |
|
Leitende Beschichtung: |
|
standard < 20Ohm/square |
|
standard sizes: |
|
| FPD - size |
glass size |
| standard 6.5"" |
120 x 140 x 4 (4.72" x 5.51" x 0.16") |
| standard 8.4" |
171 x 170 x 4 (6.73" x 6.70" x 0.16") |
| standard 9.4" |
191 x 183 x 4 (7.52" x 7.20" x 0.16") |
| standard 10.4" |
211 x 200 x 4 (8.31" x 7.87" x 0.16") |
| standard 12.1" |
246 x 225 x 4 (9.69" x 8.86" x 0.16") |
| standard 14" |
280 x 250 x 4 (11.02" x 9.84" x 0.16") |
| standard 15" |
304 x 268 x 4 (11.97" x 10.55" x 0.16") |
| standard 18" |
360 x 328 x 4 (14.17" x 12.91" x 0.16") |
|
|
tolerances: |
|
length and width = +-1mm (+- 0.039") |
|
processing: |
|
edges faceted |
|
accessories: |
|
conductive adhesive tape, please view separate data sheet |
|
max. temperature range: |
|
standard: + 45°C |
|
transmission: |
|
approx. 90% |
|
|
AR 3000 90 G 80 SP L |
|
general description |
|
|
|
name |
|
AR 3000 90 680 SP L
|
|
function: |
|
EMC-shielding, one side chemical antiglare treatment GW 80 shatterproof laminated safety glass, two-glass constructio, glasses close openings in your housing with a highly transparent conductive coating on the inside surface of the glass. The construction without wire mesh performs a clear transparent view towards your display.
Conductive adhesives tapes are available as an additional equipment tool. They can be used to connect the conductive coating on the glass to the conductive surface of the housing.
Please view our separate data sheet.
|
|
technical specifications |
|
|
|
sizes: |
|
The glasses are produced in custom-tailored dimensions. Please keep in mind, that EMC-shielding glasses are to be connected along all edges of the glass-side and a non-transparent frame appears. This frame is 10 mm (0.39") wide on each side and has to be added to the transparent glass area as a minimum and eventually the mechanical connection to the frame as well. |
|
available glass thickness: |
|
4.48mm (0.18"), 5.48mm (0.22"), 6.38mm (0.25") |
|
conductive coating: |
|
standard < 20Ohm/square |
|
standard sizes: |
|
| FPD - size |
glass size |
| standard 6,5" |
120 x 140 x 4 (4.72" x 5.51" x 0.16") |
| standard 8,4" |
171 x 170 x 4 (6.73" x 6.70" x 0.16") |
| standard 9,4" |
191 x 183 x 4 (7.52" x 7.20" x 0.16") |
| standard 10,4" |
211 x 200 x 4 (8.31" x 7.87" x 0.16") |
| standard 12,1" |
246 x 225 x 4 (9.69" x 8.86" x 0.16") |
| standard 14" |
280 x 250 x 4 (11.02" x 9.84" x 0.16") |
| standard 15" |
304 x 268 x 4 (11.97" x 10.55" x 0.16") |
| standard 18" |
360 x 328 x 4 (14.17" x 12.91" x 0.16") |
|
|
tolerances: |
|
length and width = +-1mm (+- 0.039") |
|
construction: |
|
edges faceted |
|
accessories: |
|
conductive adhesive tape, please view separate data sheet |
|
max. temperature range: |
|
standard: + 60°C |
|
transmission: |
|
approx. 90% |
|
|
Conductive adhesive tape
|
|
general description |
|
name |
|
conductive adhesive tape |
|
application: |
|
Conductive adhesive tape is used to connect EMC-shielding glasses on all edges to the inner side of the housing. Therefore a complete screening is covering the opening of the housing e.g. for the display. |
|
technical specifications |
|
construction: |
|
copper foil, tinned surface, solderable, corrosion-proof |
| |
adhesive: |
|
conductive, silver-filled acrylic adhesive |
|
dimensions: |
|
20 mm x 33 m (0.07" x 1299.21") |
|
thickness: |
|
0.076 mm (0.003") |
|
volume resistivity: |
|
0.002 ohm / inch2 |
|
surface resistance: |
|
0.58 ohm /inch2 |
|
strength of adhesive: |
|
0.25 N / 25mm (0.98") |
|
maximum tensile load: |
|
163 N / 25mm (0.98") |
|
tear expansion: |
|
6% |
|
Remark on conductivity: |
|
To optimise EMC-protection, housing surface conductivity is decisive. Do not measure with a probe tip. |
| |
availability: |
|
ex stock |
|
|
|
Only available in rolls 20 mm x 33 m (0.07" x 1299.21")! |
|
processing: |
|
Only on dry, non-greasy surfaces! |
|
|
Heating glass
|
|
general description |
|
function: |
|
Our heating glass is highly transparent without any visible heating wires
It provides an areal heating system. Standard FPD's can be used within wide temperature ranges, which are far beyond their specified data. The heating is provided commonly over the whole area in front of the display.
As an optional accessory we provide an electronic circuit board, which controls function and power consumption according to the temperature, so power consumption is minimised. Please see our separate data sheet.
A laminated vandal-proof security- glass version of heating glass is also available. |
|
technical specifications |
|
dimensions: |
|
The glasses are produced in custom-tailored dimensions. Please keep in mind, that heating glasses have to be connected on the longer glass side and a non-transparent area will cover these connection bus-bars. These bars are 20mm (0.79") wide on each side and have to be added to the transparent glass area as a minimum.
basic construction sketch:
|
 |
|
thickness: |
|
4 mm |
| |
standard dimension of heating glass: |
|
| FPD - size |
glass size |
| standard 6,5" |
150 x 140 x 4 (5.91" x 5.51" x 0.16") |
| standard 8,4" |
191 x 170 x 4 (7.52" x 6.70" x 0.16") |
| standard 9,4" |
211 x 183 x 4 (8.31" x 7.20" x 0.16") |
| standard 10,4" |
231 x 200 x 4 (9.09" x 7.87" x 0.16") |
| standard 12,1" |
266 x 225 x 4 (10.47" x 8.86" x 0.16") |
| standard 14" |
300 x 250 x 4 (11.81" x 9.84" x 0.16") |
| standard 15" |
324 x 268 x 4 (12.76" x 10.55" x 0.16") |
| standard 18" |
380 x 328 x 4 (14.96" x 12.91" x 0.16") |
|
|
tolerances: |
|
length and width = +-1mm (+- 0.039") |
|
construction: |
|
edges faceted |
|
connections: |
|
power supply cable (length 200 mm (7.87")), fixed to the glass for pull relief, connected with solderable conductive adhesive tape on both long sides |
|
accessories: |
|
heating control unit, please view separate data sheet |
|
max. temperature range: |
|
standard: +60°C |
|
transmission of heating glass: |
|
approx. 90% |
|
|
Electronic heating control unit
|
|
general description |
|
name / order no.: |
|
electronic heating control unit, order no. 322 0000 1 |
|
function: |
|
The electronic heating control unit is an optional accessory for hating up glasses of our production. The control unit is connected between power supply and heating glass and will switch the power on according to the temperature. |
|
technical specifications |
|
description: |
|
SMD-circuit on a PCB with electronic control |
|
dimensions: |
|
75 x 15 x 6 mm (2.95" x 0.59" x 0.24")
2 free mounting holes, (durchmesser-symbol einfügen) 2.5 mm (0.01"), distance 70mm (2.76") |
|
interfaces: |
|
power supply cable, length 200 mm (7.9"), brazed, two soldering pads for connection to heating glass |
|
power consumption: |
|
+ 12 V DC |
|
power-on temperature: |
|
+ 5°C with decreasing temperature |
|
power-off temperature: |
|
+ 15°C with rising temperature |
|
power supply: |
|
depends on area and length/width ratio of the heating glass, approx. 1.1 A for 10.4" display |
|